>
Online Registration

Staad Pro

Staad Pro

COURSE CONTENTS FOR STAAD Pro & RC DESIGNER & STAAD FOUNDATION (FOR POLYTECHNIC,B.TECH,M.TECH, B.ARCH)

WHAT YOU 'll LEARN?
  • Basic of STAAD Pro.
  • Advance Modelling
  • Analyse all Kinds of structural member
  • analyse and design a simple Residential Building.
  • Details and design the column and beam longitudinal and shear reinforcement.
CONCEPTS RELATED TO EARTHQUAKE AND WIND ANALYSIS THAT YOU WILL LEARN
  • TYPES OF STRUCTURAL SYSTEM
  • DEFINE SURFACE,PLATE AND AREA IN STAAD.Pro
  • STATIC ANALYSIS MANUALLY OVERVIEW
  • DYANAMIC ANALYSIS MANUALLY
  • SCALING OF STATIC AND DYNAMIC RESULTS IN TSD.
  • BASIC OF WIND AND SEISMIC FORCES OF BUILDING AND ITS CALCULATIONS. CALCULATION OF CENTER OF MASS AND CENTER OF RIGIDITY
  • TORSIONAL IRREGULARITY CONCEPTS AND ITS CHECK IN ETABS.
  • LIVE LOAD REDUCTION IN STAAD.Pro.
  • SOFT STOREY AND SHORT COLUMNS.
  • MASS PARTICIPATION FACTOR AND RATIO AS PER IS CODE
  • STRONG COLUMN WEAK BEAM CONCEPT.
  • LOAD COMBINATION FOR COLUMNS BEAM SHEAR WALL FOUNDATIONS STOREY DRIFT,DRIFT RATIO AND IS CLAUSE.
  • STOREY DRIFT,DRIFT RATIO AND IS CLAUSE, STOREY DISPLACEMENT.
LEVEL-1
  • Introduction to the Welcome Screen.
  • Structural steel section database Library Available in STAAD.Pro
  • Create grid spacing and simple story data
  • Create circular Grid Spacing
  • Create uniform grid Spacing
  • Create Non-Uniform grid data
  • Define Material Properties
  • Define reinforcement bar sizes
  • Define Concrete frmae section Properties
  • Define slab properties
  • Define wall section
  • Define Irregular Floor Object
  • Draw Irregular wall object
  • Define Point Springs,Lines Springs, Area Springs and Soil Profile
  • Quick draw Secondary Beams
  • Draw beam,column and Bracing system.
  • Define Mass Sourse being used for earthquake Analysis
  • Define Load Patterns
  • Define Load Cases
  • Define load Combinations
  • Define Model Cases
  • Define Diaphragms
  • Assign Support ( Exp- Pinned,Fixed or Roller)
  • Assign Joint Loads (Translational force and Rotational Moments Along All Axis)
  • Assign Frame Loads(Point load,UDL Load,Trapezodial Loads)
  • Assign Area Loads (Uniform,Non-Uniform.

LEVEL-2
ANALYSIS AND DESIGN OF SIMPLY SUPPORTED BEAM
  • Openig A New Model
  • Define the Grids
  • Model the Beam
  • Assigning the Support
  • Application of Load
  • Analyzing the Beam
  • Genrate SFD (Shear force diagram) and BMD(Bending Moment Diagram)
  • Go to the Design.
  • Check design Pass or Fail.
LEVEL-3 (Working with Real World Project)
  • Read Architectural Plans
  • Understanding The Structure.
  • Read Architectural Grid Plans.
  • Define grid
  • Define Materials
  • Define section properties
  • Extruding the Model
  • Modelling of Balcony
  • Assigning Support to the Model
  • Modelling of staircase
  • Define Reference Points And Reference Planes
  • Model the Midlanding and Other Type Horizontal Member.
  • Model Secondary Beam
  • Model Curved Beam
  • Modelling Circular Column
  • Modelling Eccentric Columns
  • Load applications
  • Define Load Patterns,Diaphragm And Mass Source
  • Application of Partition Load
  • Application Of shell/Slab Load
  • Application Of wall Load on Slab/Shell
  • Meshing Of Slab and Frame Structures
  • Application of lateral Loads
  • Application of Earthquake Load
  • Application Of wind Load
  • Load Combination And Structural Analysis
  • Defining The Load Combinations
  • Analyzing the Building
  • Design of the Building
  • Check failed Member
  • Redesign Member
  • Rebar Percentage
  • Beam Column Capacity
  • Storey Displacement,Storey Drift and Drift ratio.
  • Torsional Irregularity
  • Detailling Of column Rebars
  • Understanding The Rebar Values
  • Rebar combination
  • Detailling The Rebars Of All Floor Level.
  • Concept Of the Lapping Of Bars In all Floor Level.
  • Calculating the Required spacing of the lateral Ties
  • Export Center of Mass and Center of Rigidity Values
  • Export Design Result
  • Preliminary Design ,Sesmic Weight,Base Shear Calculation
  • Preliminary Design of Column
  • Preliminary Design of Slab
  • PreliminaryDesign of Beam
  • Seismic Weight Calculation of Building
  • Base Shear and storey Shear Calculation.
  • Creating Final Report.

LEVEL-4 (STAAD RC DESIGNER)
  • Modelling import in STAAD. Pro
  • Design of Groups and briefs
  • Comparison of Result of STAAD.Pro and STAAD RC designer.
  • Import of sections to Auto CAD from STAAD RC designer.
LEVEL-5 (STAAD Foundation)
  • Modelling import in STAAD RC foundation from STAAD. Pro
  • Analysis of isolated Footing
  • Analysis of Combine Footing
  • Analysis of strap Footing
  • Analysis of Pile Foundation
  • Concept Of reading GA drawing in Foundation
  • Concept of Import from STAAD Foundation to AutoCAD.